Summary Statement
Link to NIOSH web site containing detailed diagrams to assist in visualizing the areas around various construction vehicles and equipment that are unable to be seen from the operator's position. These areas are commonly referred to as Blind Areas. This information was developed for safety personnel and instructors to use as a training aid to develop awareness about hazardous areas around construction vehicles and equipment due to limited visibility.
This information is also available on the NIOSH website here:
http://www.cdc.gov/niosh/topics/highwayworkzones/BAD/default.html
Studies show that highway and street construction workers are at a significant risk of fatal and serious nonfatal injuries while working in and around a street/highway construction jobsite. In addition to the risk of injury from passing motor vehicle traffic outside the work zone, there is an equally hazardous risk of injury from movement of construction vehicles and equipment within the work zone. In analyzing the data collected on fatalities and serious nonfatal injuries occurring from 1992-1998, researchers from the National Institute for Occupational Safety and Health (NIOSH) have concluded that "safety efforts must also protect construction workers within work zones who are working on foot around moving vehicles and equipment..." [Pratt et al., 2001]. Collision occurrences have been attributed in part to limited visibility around the equipment.
Within this web site you will find detailed diagrams to assist in visualizing the areas around various construction vehicles and equipment that are unable to be seen from the operator's position. These areas are commonly referred to as Blind Areas. For each construction vehicle, three different Blind Area Diagrams are available to represent the ability of the operator to see an object at three different elevations: ground level, 900 mm (3'), and 1500 mm (4' 11"). The 900 mm plane represents the average height of a channelizing device, e.g. construction barrels that are commonly used in road construction. The 1500 mm plane corresponds to the height of a 4' 11" person.
NIOSH is providing this information on blind areas primarily for safety personnel and instructors to use as a training aid to develop awareness about hazardous areas around construction vehicles and equipment due to limited visibility. The test procedures for developing the Blind Area Diagrams are also given within this web site by selecting the appropriate link located on the right side of the page. This information is provided in the event safety personnel or instructors would like to develop their own Blind Area Diagrams. For more general information on highway work zone safety and how to protect workers, visit the NIOSH Highway Work Zones page.
